Programming - cpueblo.com

윈도우 ERROR 코드 목록 표


글쓴이 : 유광희 날짜 : 2004-10-30 (토) 01:11 조회 : 8535
Microsoft Windows CE .NET 4.2 System Errors - Numerical OrderThe following table shows possible system error values. Code Description Name 0 The operation completed successfully. ERROR_SUCCESS 1 Incorrect function. ERROR_INVALID_FUNCTION 2 The system cannot find the file specified. ERROR_FILE_NOT_FOUND 3 The system cannot find the path specified. ERROR_PATH_NOT_FOUND 4 The system cannot open the file. ERROR_TOO_MANY_OPEN_FILES 5 Access is denied. ERROR_ACCESS_DENIED 6 The handle is invalid. ERROR_INVALID_HANDLE 7 The storage control blocks were destroyed. ERROR_ARENA_TRASHED 8 Not enough storage is available to process this command. ERROR_NOT_ENOUGH_MEMORY 9 The storage control block address is invalid. ERROR_INVALID_BLOCK 10 The environment is incorrect. ERROR_BAD_ENVIRONMENT 11 An attempt was made to load a program with an incorrect format. ERROR_BAD_FORMAT 12 The access code is invalid. ERROR_INVALID_ACCESS 13 The data is invalid. ERROR_INVALID_DATA 14 Not enough storage is available to complete this operation. ERROR_OUTOFMEMORY 15 The system cannot find the drive specified. ERROR_INVALID_DRIVE 16 The directory cannot be removed. ERROR_CURRENT_DIRECTORY 17 The system cannot move the file to a different disk drive. ERROR_NOT_SAME_DEVICE 18 There are no more files. ERROR_NO_MORE_FILES 19 The media is write protected. ERROR_WRITE_PROTECT 20 The system cannot find the specified device. ERROR_BAD_UNIT 21 The device is not ready. ERROR_NOT_READY 22 The device does not recognize the command. ERROR_BAD_COMMAND 23 Data error (cyclic redundancy check). ERROR_CRC 24 The program issued a command but the command length is incorrect. ERROR_BAD_LENGTH 25 The drive cannot locate a specific area or track on the disk. ERROR_SEEK 26 The specified disk or diskette cannot be accessed. ERROR_NOT_DOS_DISK 27 The drive cannot find the sector requested. ERROR_SECTOR_NOT_FOUND 28 The printer is out of paper. ERROR_OUT_OF_PAPER 29 The system cannot write to the specified device. ERROR_WRITE_FAULT 30 The system cannot read from the specified device. ERROR_READ_FAULT 31 A device attached to the system is not functioning. ERROR_GEN_FAILURE 32 The process cannot access the file because it is being used by another process. ERROR_SHARING_VIOLATION 33 The process cannot access the file because another process has locked a portion of the file. ERROR_LOCK_VIOLATION 34 The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1. ERROR_WRONG_DISK 36 Too many files opened for sharing. ERROR_SHARING_BUFFER_EXCEEDED 38 Reached the end of the file. ERROR_HANDLE_EOF 39 The disk is full. ERROR_HANDLE_DISK_FULL 50 The network request is not supported. ERROR_NOT_SUPPORTED 51 The remote computer is not available. ERROR_REM_NOT_LIST 52 A duplicate name exists on the network. ERROR_DUP_NAME 53 The network path was not found. ERROR_BAD_NETPATH 54 The network is busy. ERROR_NETWORK_BUSY 55 The specified network resource or device is no longer available. ERROR_DEV_NOT_EXIST 56 The network BIOS command limit has been reached. ERROR_TOO_MANY_CMDS 57 A network adapter hardware error occurred. ERROR_ADAP_HDW_ERR 58 The specified server cannot perform the requested operation. ERROR_BAD_NET_RESP 59 An unexpected network error occurred. ERROR_UNEXP_NET_ERR 60 The remote adapter is not compatible. ERROR_BAD_REM_ADAP 61 The printer queue is full. ERROR_PRINTQ_FULL 62 Space to store the file waiting to be printed is not available on the server. ERROR_NO_SPOOL_SPACE 63 Your file waiting to be printed was deleted. ERROR_PRINT_CANCELLED 64 The specified network name is no longer available. ERROR_NETNAME_DELETED 65 Network access is denied. ERROR_NETWORK_ACCESS_DENIED 66 The network resource type is not correct. ERROR_BAD_DEV_TYPE 67 The network name cannot be found. ERROR_BAD_NET_NAME 68 The name limit for the local computer network adapter card was exceeded. ERROR_TOO_MANY_NAMES 69 The network BIOS session limit was exceeded. ERROR_TOO_MANY_SESS 70 The remote server has been paused or is in the process of being started. ERROR_SHARING_PAUSED 71 No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept. ERROR_REQ_NOT_ACCEP 72 The specified printer or disk device has been paused. ERROR_REDIR_PAUSED 80 The file exists. ERROR_FILE_EXISTS 82 The directory or file cannot be created. ERROR_CANNOT_MAKE 83 Fail on interrupt 24 handler. ERROR_FAIL_I24 84 Storage to process this request is not available. ERROR_OUT_OF_STRUCTURES 85 The local device name is already in use. ERROR_ALREADY_ASSIGNED 86 The specified network password is not correct. ERROR_INVALID_PASSWORD 87 The parameter is incorrect. ERROR_INVALID_PARAMETER 88 A write fault occurred on the network. ERROR_NET_WRITE_FAULT 89 The system cannot start another process at this time. ERROR_NO_PROC_SLOTS 100 Cannot create another system semaphore. ERROR_TOO_MANY_SEMAPHORES 101 The exclusive semaphore is owned by another process. ERROR_EXCL_SEM_ALREADY_OWNED 102 The semaphore is set and cannot be closed. ERROR_SEM_IS_SET 103 The semaphore cannot be set again. ERROR_TOO_MANY_SEM_REQUESTS 104 Cannot request exclusive semaphores at interrupt time. ERROR_INVALID_AT_INTERRUPT_TIME 105 The previous ownership of this semaphore has ended. ERROR_SEM_OWNER_DIED 106 Insert the diskette for drive %1. ERROR_SEM_USER_LIMIT 107 The program stopped because an alternate diskette was not inserted. ERROR_DISK_CHANGE 108 The disk is in use or locked by another process. ERROR_DRIVE_LOCKED 109 The pipe has been ended. ERROR_BROKEN_PIPE 110 The system cannot open the device or file specified. ERROR_OPEN_FAILED 111 The file name is too long. ERROR_BUFFER_OVERFLOW 112 There is not enough space on the disk. ERROR_DISK_FULL 113 No more internal file identifiers available. ERROR_NO_MORE_SEARCH_HANDLES 114 The target internal file identifier is incorrect. ERROR_INVALID_TARGET_HANDLE 117 The IOCTL call made by the application program is not correct. ERROR_INVALID_CATEGORY 118 The verify-on-write switch parameter value is not correct. ERROR_INVALID_VERIFY_SWITCH 119 The system does not support the command requested. ERROR_BAD_DRIVER_LEVEL 120 This function is not valid on this platform. ERROR_CALL_NOT_IMPLEMENTED 121 The semaphore time-out period has expired. ERROR_SEM_TIMEOUT 122 The data area passed to a system call is too small. ERROR_INSUFFICIENT_BUFFER 123 The file name, directory name, or volume label syntax is incorrect. ERROR_INVALID_NAME 124 The system call level is not correct. ERROR_INVALID_LEVEL 125 The disk has no volume label. ERROR_NO_VOLUME_LABEL 126 The specified module could not be found. ERROR_MOD_NOT_FOUND 127 The specified procedure could not be found. ERROR_PROC_NOT_FOUND 128 There are no child processes to wait for. ERROR_WAIT_NO_CHILDREN 129 The %1 application cannot be run in Windows NT mode. ERROR_CHILD_NOT_COMPLETE 130 Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O. ERROR_DIRECT_ACCESS_HANDLE 131 An attempt was made to move the file pointer before the beginning of the file. ERROR_NEGATIVE_SEEK 132 The file pointer cannot be set on the specified device or file. ERROR_SEEK_ON_DEVICE 133 A JOIN or SUBST command cannot be used for a drive that contains previously joined drives. ERROR_IS_JOIN_TARGET 134 An attempt was made to use a JOIN or SUBST command on a drive that has already been joined. ERROR_IS_JOINED 135 An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted. ERROR_IS_SUBSTED 136 The system tried to delete the JOIN of a drive that is not joined. ERROR_NOT_JOINED 137 The system tried to delete the substitution of a drive that is not substituted. ERROR_NOT_SUBSTED 138 The system tried to join a drive to a directory on a joined drive. ERROR_JOIN_TO_JOIN 139 The system tried to substitute a drive to a directory on a substituted drive. ERROR_SUBST_TO_SUBST 140 The system tried to join a drive to a directory on a substituted drive. ERROR_JOIN_TO_SUBST 141 The system tried to SUBST a drive to a directory on a joined drive. ERROR_SUBST_TO_JOIN 142 The system cannot perform a JOIN or SUBST at this time. ERROR_BUSY_DRIVE 143 The system cannot join or substitute a drive to or for a directory on the same drive. ERROR_SAME_DRIVE 144 The directory is not a subdirectory of the root directory. ERROR_DIR_NOT_ROOT 145 The directory is not empty. ERROR_DIR_NOT_EMPTY 146 The path specified is being used in a substitute. ERROR_IS_SUBST_PATH 147 Not enough resources are available to process this command. ERROR_IS_JOIN_PATH 148 The path specified cannot be used at this time. ERROR_PATH_BUSY 149 An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute. ERROR_IS_SUBST_TARGET 150 System trace information was not specified in your Config.sys file, or tracing is disallowed. ERROR_SYSTEM_TRACE 151 The number of specified semaphore events for DosMuxSemWait is not correct. ERROR_INVALID_EVENT_COUNT 152 DosMuxSemWait did not execute; too many semaphores are already set. ERROR_TOO_MANY_MUXWAITERS 153 The DosMuxSemWait list is not correct. ERROR_INVALID_LIST_FORMAT 154 The volume label you entered exceeds the label character limit of the target file system. ERROR_LABEL_TOO_LONG 155 Cannot create another thread. ERROR_TOO_MANY_TCBS 156 The recipient process has refused the signal. ERROR_SIGNAL_REFUSED 157 The segment is already discarded and cannot be locked. ERROR_DISCARDED 158 The segment is already unlocked. ERROR_NOT_LOCKED 159 The address for the thread identifier is not correct. ERROR_BAD_THREADID_ADDR 160 The argument string passed to DosExecPgm is not correct. ERROR_BAD_ARGUMENTS 161 The specified path is invalid. ERROR_BAD_PATHNAME 162 A signal is already pending. ERROR_SIGNAL_PENDING 164 No more threads can be created in the system. ERROR_MAX_THRDS_REACHED 167 Unable to lock a region of a file. ERROR_LOCK_FAILED 170 The requested resource is in use. ERROR_BUSY 173 A lock request was not outstanding for the supplied cancel region. ERROR_CANCEL_VIOLATION 174 The file system does not support atomic changes to the lock type. ERROR_ATOMIC_LOCKS_NOT_SUPPORTED 180 The system detected a segment number that was not correct. ERROR_INVALID_SEGMENT_NUMBER 182 The operating system cannot run %1. ERROR_INVALID_ORDINAL 183 Cannot create a file when that file already exists. ERROR_ALREADY_EXISTS 186 The flag passed is not correct. ERROR_INVALID_FLAG_NUMBER 187 The specified system semaphore name was not found. ERROR_SEM_NOT_FOUND 188 The operating system cannot run %1. ERROR_INVALID_STARTING_CODESEG 189 The operating system cannot run %1. ERROR_INVALID_STACKSEG 190 The operating system cannot run %1. ERROR_INVALID_MODULETYPE 191 Cannot run %1 in Windows NT mode. ERROR_INVALID_EXE_SIGNATURE 192 The operating system cannot run %1. ERROR_EXE_MARKED_INVALID 193 Is not a valid application. ERROR_BAD_EXE_FORMAT 194 The operating system cannot run %1. ERROR_ITERATED_DATA_EXCEEDS_64k 195 The operating system cannot run %1. ERROR_INVALID_MINALLOCSIZE 196 The operating system cannot run this application program. ERROR_DYNLINK_FROM_INVALID_RING 197 The operating system is not presently configured to run this application. ERROR_IOPL_NOT_ENABLED 198 The operating system cannot run %1. ERROR_INVALID_SEGDPL 199 The operating system cannot run this application program. ERROR_AUTODATASEG_EXCEEDS_64k 200 The code segment cannot be greater than or equal to 64 KB. ERROR_RING2SEG_MUST_BE_MOVABLE 201 The operating system cannot run %1. ERROR_RELOC_CHAIN_XEEDS_SEGLIM 202 The operating system cannot run %1. ERROR_INFLOOP_IN_RELOC_CHAIN 203 The system could not find the environment option that was entered. ERROR_ENVVAR_NOT_FOUND 205 No process in the command subtree has a signal handler. ERROR_NO_SIGNAL_SENT 206 The file name or extension is too long. ERROR_FILENAME_EXCED_RANGE 207 The ring 2 stack is in use. ERROR_RING2_STACK_IN_USE 208 The global file name characters, * or ?, are entered incorrectly or too many global file name characters are specified. ERROR_META_EXPANSION_TOO_LONG 209 The signal being posted is not correct. ERROR_INVALID_SIGNAL_NUMBER 210 The signal handler cannot be set. ERROR_THREAD_1_INACTIVE 212 The segment is locked and cannot be reallocated. ERROR_LOCKED 214 Too many dynamic-link modules are attached to this program or dynamic-link module. ERROR_TOO_MANY_MODULES 215 Cannot nest calls to the LoadModule function. ERROR_NESTING_NOT_ALLOWED 216 The image file %1 is valid, but is for a machine type other than the current machine. ERROR_EXE_MACHINE_TYPE_MISMATCH 230 The pipe state is invalid. ERROR_BAD_PIPE 231 All pipe instances are busy. ERROR_PIPE_BUSY 232 The pipe is being closed. ERROR_NO_DATA 233 No process is on the other end of the pipe. ERROR_PIPE_NOT_CONNECTED 234 More data is available. ERROR_MORE_DATA 240 The session was canceled. ERROR_VC_DISCONNECTED 254 The specified extended attribute name was invalid. ERROR_INVALID_EA_NAME 255 The extended attributes are inconsistent. ERROR_EA_LIST_INCONSISTENT 259 No more data is available. ERROR_NO_MORE_ITEMS 266 The copy functions cannot be used. ERROR_CANNOT_COPY 267 The directory name is invalid. ERROR_DIRECTORY 275 The extended attributes did not fit in the buffer. ERROR_EAS_DIDNT_FIT 276 The extended attribute file on the mounted file system is corrupt. ERROR_EA_FILE_CORRUPT 277 The extended attribute table file is full. ERROR_EA_TABLE_FULL 278 The specified extended attribute handle is invalid. ERROR_INVALID_EA_HANDLE 282 The mounted file system does not support extended attributes. ERROR_EAS_NOT_SUPPORTED 288 Attempt to release mutex not owned by caller. ERROR_NOT_OWNER 298 Too many posts were made to a semaphore. ERROR_TOO_MANY_POSTS 299 Only part of a ReadProcessMemory or WriteProcessMemory request was completed. ERROR_PARTIAL_COPY 317 The system cannot find message text for message number 0x%1 in the message file for %2. ERROR_MR_MID_NOT_FOUND 487 Attempt to access invalid address. ERROR_INVALID_ADDRESS 534 Arithmetic result exceeded 32 bits. ERROR_ARITHMETIC_OVERFLOW 535 There is a process on other end of the pipe. ERROR_PIPE_CONNECTED 536 Waiting for a process to open the other end of the pipe. ERROR_PIPE_LISTENING 994 Access to the extended attribute was denied. ERROR_EA_ACCESS_DENIED 995 The I/O operation has been aborted because of either a thread exit or an application request. ERROR_OPERATION_ABORTED 996 Overlapped I/O event is not in a signaled state. ERROR_IO_INCOMPLETE 997 Overlapped I/O operation is in progress. ERROR_IO_PENDING 998 Invalid access to memory location. ERROR_NOACCESS 999 Error performing inpage operation. ERROR_SWAPERROR 1001 Recursion too deep; the stack overflowed. ERROR_STACK_OVERFLOW 1002 The window cannot act on the sent message. ERROR_INVALID_MESSAGE 1003 Cannot complete this function. ERROR_CAN_NOT_COMPLETE 1004 Invalid flags. ERROR_INVALID_FLAGS 1005 The volume does not contain a recognized file system. Verify that all required file system drivers are loaded and that the volume is not corrupted. ERROR_UNRECOGNIZED_VOLUME 1006 The volume for a file has been externally altered so that the opened file is no longer valid. ERROR_FILE_INVALID 1007 The requested operation cannot be performed in full-screen mode. ERROR_FULLSCREEN_MODE 1008 An attempt was made to reference a token that does not exist. ERROR_NO_TOKEN 1009 The configuration registry database is corrupt. ERROR_BADDB 1010 The configuration registry key is invalid. ERROR_BADKEY 1011 The configuration registry key could not be opened. ERROR_CANTOPEN 1012 The configuration registry key could not be read. ERROR_CANTREAD 1013 The configuration registry key could not be written. ERROR_CANTWRITE 1014 One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful. ERROR_REGISTRY_RECOVERED 1015 The registry is corrupted. The structure of one of the files that contains registry data is corrupted, or the system's image of the file in memory is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted. ERROR_REGISTRY_CORRUPT 1016 An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry. ERROR_REGISTRY_IO_FAILED 1017 The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format. ERROR_NOT_REGISTRY_FILE 1018 Illegal operation attempted on a registry key that has been marked for deletion. ERROR_KEY_DELETED 1019 System could not allocate the required space in a registry log. ERROR_NO_LOG_SPACE 1020 Cannot create a symbolic link in a registry key that already has subkeys or values. ERROR_KEY_HAS_CHILDREN 1021 Cannot create a stable subkey under a volatile parent key. ERROR_CHILD_MUST_BE_VOLATILE 1022 A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes. ERROR_NOTIFY_ENUM_DIR 1051 A stop control has been sent to a service that other running services are dependent on. ERROR_DEPENDENT_SERVICES_RUNNING 1052 The requested control is not valid for this service. ERROR_INVALID_SERVICE_CONTROL 1053 The service did not respond to the start or control request in a timely fashion. ERROR_SERVICE_REQUEST_TIMEOUT 1054 A thread could not be created for the service. ERROR_SERVICE_NO_THREAD 1055 The service database is locked. ERROR_SERVICE_DATABASE_LOCKED 1056 An instance of the service is already running. ERROR_SERVICE_ALREADY_RUNNING 1057 The account name is invalid or does not exist. ERROR_INVALID_SERVICE_ACCOUNT 1058 The specified service is disabled and cannot be started. ERROR_SERVICE_DISABLED 1059 Circular service dependency was specified. ERROR_CIRCULAR_DEPENDENCY 1060 The specified service does not exist as an installed service. ERROR_SERVICE_DOES_NOT_EXIST 1061 The service cannot accept control messages at this time. ERROR_SERVICE_CANNOT_ACCEPT_CTRL 1062 The service has not been started. ERROR_SERVICE_NOT_ACTIVE 1063 The service process could not connect to the service controller. ERROR_FAILED_SERVICE_CONTROLLER_CONNECT 1064 An exception occurred in the service when handling the control request. ERROR_EXCEPTION_IN_SERVICE 1065 The database specified does not exist. ERROR_DATABASE_DOES_NOT_EXIST 1066 The service has returned a service-specific error code. ERROR_SERVICE_SPECIFIC_ERROR 1067 The process terminated unexpectedly. ERROR_PROCESS_ABORTED 1068 The dependency service or group failed to start. ERROR_SERVICE_DEPENDENCY_FAIL 1069 The service did not start due to a logon failure. ERROR_SERVICE_LOGON_FAILED 1070 After starting, the service stopped responding (hung) in a start-pending state. ERROR_SERVICE_START_HANG 1071 The specified service database lock is invalid. ERROR_INVALID_SERVICE_LOCK 1072 The specified service has been marked for deletion. ERROR_SERVICE_MARKED_FOR_DELETE 1073 The specified service already exists. ERROR_SERVICE_EXISTS 1074 The system is currently running with the last-known-good configuration. ERROR_ALREADY_RUNNING_LKG 1075 The dependency service does not exist or has been marked for deletion. ERROR_SERVICE_DEPENDENCY_DELETED 1076 The current boot has already been accepted for use as the last-known-good control set. ERROR_BOOT_ALREADY_ACCEPTED 1077 No attempts to start the service have been made since the last boot. ERROR_SERVICE_NEVER_STARTED 1078 The name is already in use as either a service name or a service display name. ERROR_DUPLICATE_SERVICE_NAME 1079 The account specified for this service is different from the account specified for other services running in the same process. ERROR_DIFFERENT_SERVICE_ACCOUNT 1100 The physical end of the tape has been reached. ERROR_END_OF_MEDIA 1101 A tape access reached a filemark. ERROR_FILEMARK_DETECTED 1102 The beginning of the tape or partition was encountered. ERROR_BEGINNING_OF_MEDIA 1103 A tape access reached the end of a set of files. ERROR_SETMARK_DETECTED 1104 No more data is on the tape. ERROR_NO_DATA_DETECTED 1105 Tape could not be partitioned. ERROR_PARTITION_FAILURE 1106 When accessing a new tape of a multivolume partition, the current block size is incorrect. ERROR_INVALID_BLOCK_LENGTH 1107 Tape partition information could not be found when loading a tape. ERROR_DEVICE_NOT_PARTITIONED 1108 Unable to lock the media eject mechanism. ERROR_UNABLE_TO_LOCK_MEDIA 1109 Unable to unload the media. ERROR_UNABLE_TO_UNLOAD_MEDIA 1110 The media in the drive may have changed. ERROR_MEDIA_CHANGED 1111 The I/O bus was reset. ERROR_BUS_RESET 1112 No media in drive. ERROR_NO_MEDIA_IN_DRIVE 1113 No mapping for the Unicode character exists in the target multibyte code page. ERROR_NO_UNICODE_TRANSLATION 1114 A dynamic link library (DLL) initialization routine failed. ERROR_DLL_INIT_FAILED 1115 A system shutdown is in progress. ERROR_SHUTDOWN_IN_PROGRESS 1116 Unable to abort the system shutdown because no shutdown was in progress. ERROR_NO_SHUTDOWN_IN_PROGRESS 1117 The request could not be performed because of an I/O device error. ERROR_IO_DEVICE 1118 No serial device was successfully initialized. The serial driver will unload. ERROR_SERIAL_NO_DEVICE 1119 Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened. ERROR_IRQ_BUSY 1120 A serial I/O operation was completed by another write to the serial port. The IOCTL_SERIAL_XOFF_COUNTER reached zero.) ERROR_MORE_WRITES 1121 A serial I/O operation completed because the time-out period expired. In other words, the IOCTL_SERIAL_XOFF_COUNTER did not reach zero. ERROR_COUNTER_TIMEOUT 1122 No identifier address mark was found on the floppy disk. ERROR_FLOPPY_ID_MARK_NOT_FOUND 1123 Mismatch between the floppy disk sector identifier field and the floppy disk controller track address. ERROR_FLOPPY_WRONG_CYLINDER 1124 The floppy disk controller reported an error that is not recognized by the floppy disk driver. ERROR_FLOPPY_UNKNOWN_ERROR 1125 The floppy disk controller returned inconsistent results in its registers. ERROR_FLOPPY_BAD_REGISTERS 1126 While accessing the hard disk, a recalibrate operation failed, even after retries. ERROR_DISK_RECALIBRATE_FAILED 1127 While accessing the hard disk, a disk operation failed even after retries. ERROR_DISK_OPERATION_FAILED 1128 While accessing the hard disk, a disk controller reset was needed, but even that failed. ERROR_DISK_RESET_FAILED 1129 Physical end of tape encountered. ERROR_EOM_OVERFLOW 1130 Not enough server storage is available to process this command. ERROR_NOT_ENOUGH_SERVER_MEMORY 1131 A potential deadlock condition has been detected. ERROR_POSSIBLE_DEADLOCK 1132 The base address or the file offset specified does not have the proper alignment. ERROR_MAPPED_ALIGNMENT 1140 An attempt to change the system power state was vetoed by another application or driver. ERROR_SET_POWER_STATE_VETOED 1141 The basic input/output system (BIOS) failed an attempt to change the system power state. ERROR_SET_POWER_STATE_FAILED 1142 An attempt was made to create more links on a file than the file system supports. ERROR_TOO_MANY_LINKS 1150 The specified program requires a newer version of Windows. ERROR_OLD_WIN_VERSION 1151 The specified program is not a Windows or MS-DOS program. ERROR_APP_WRONG_OS 1152 Cannot start more than one instance of the specified program. ERROR_SINGLE_INSTANCE_APP 1153 The specified program was written for an earlier version of Windows. ERROR_RMODE_APP 1154 One of the library files needed to run this application is damaged. ERROR_INVALID_DLL 1155 No application is associated with the specified file for this operation. ERROR_NO_ASSOCIATION 1156 An error occurred in sending the command to the application. ERROR_DDE_FAIL 1157 One of the library files needed to run this application cannot be found. ERROR_DLL_NOT_FOUND 1200 The specified device name is invalid. ERROR_BAD_DEVICE 1201 The device is not currently connected but it is a remembered connection. ERROR_CONNECTION_UNAVAIL 1202 An attempt was made to remember a device that had previously been remembered. ERROR_DEVICE_ALREADY_REMEMBERED 1203 No network provider accepted the given network path. ERROR_NO_NET_OR_BAD_PATH 1204 The specified network provider name is invalid. ERROR_BAD_PROVIDER 1205 Unable to open the network connection profile. ERROR_CANNOT_OPEN_PROFILE 1206 The network connection profile is corrupt. ERROR_BAD_PROFILE 1207 Cannot enumerate a noncontainer. ERROR_NOT_CONTAINER 1208 An extended error has occurred. ERROR_EXTENDED_ERROR 1209 The format of the specified group name is invalid. ERROR_INVALID_GROUPNAME 1210 The format of the specified computer name is invalid. ERROR_INVALID_COMPUTERNAME 1211 The format of the specified event name is invalid. ERROR_INVALID_EVENTNAME 1212 The format of the specified domain name is invalid. ERROR_INVALID_DOMAINNAME 1213 The format of the specified service name is invalid. ERROR_INVALID_SERVICENAME 1214 The format of the specified network name is invalid. ERROR_INVALID_NETNAME 1215 The format of the specified share name is invalid. ERROR_INVALID_SHARENAME 1216 The format of the specified password is invalid. ERROR_INVALID_PASSWORDNAME 1217 The format of the specified message name is invalid. ERROR_INVALID_MESSAGENAME 1218 The format of the specified message destination is invalid. ERROR_INVALID_MESSAGEDEST 1219 The credentials supplied conflict with an existing set of credentials. ERROR_SESSION_CREDENTIAL_CONFLICT 1220 An attempt was made to establish a session to a network server, but there are already too many sessions established to that server. ERROR_REMOTE_SESSION_LIMIT_EXCEEDED 1221 The workgroup or domain name is already in use by another computer on the network. ERROR_DUP_DOMAINNAME 1222 The network is not present or not started. ERROR_NO_NETWORK 1223 The operation was canceled by the user. ERROR_CANCELLED 1224 The requested operation cannot be performed on a file with a user-mapped section open. ERROR_USER_MAPPED_FILE 1225 The remote system refused the network connection. ERROR_CONNECTION_REFUSED 1226 The network connection was gracefully closed. ERROR_GRACEFUL_DISCONNECT 1227 The network transport endpoint already has an address associated with it. ERROR_ADDRESS_ALREADY_ASSOCIATED 1228 An address has not yet been associated with the network endpoint. ERROR_ADDRESS_NOT_ASSOCIATED 1229 An operation was attempted on a nonexistent network connection. ERROR_CONNECTION_INVALID 1230 An invalid operation was attempted on an active network connection. ERROR_CONNECTION_ACTIVE 1231 The remote network is not reachable by the transport. ERROR_NETWORK_UNREACHABLE 1232 The remote system is not reachable by the transport. ERROR_HOST_UNREACHABLE 1233 The remote system does not support the transport protocol. ERROR_PROTOCOL_UNREACHABLE 1234 No service is operating at the destination network endpoint on the remote system. ERROR_PORT_UNREACHABLE 1235 The request was aborted. ERROR_REQUEST_ABORTED 1236 The network connection was aborted by the local system. ERROR_CONNECTION_ABORTED 1237 The operation could not be completed. A retry should be performed. ERROR_RETRY 1238 A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached. ERROR_CONNECTION_COUNT_LIMIT 1239 Attempting to log in during an unauthorized time of day for this account. ERROR_LOGIN_TIME_RESTRICTION 1240 The account is not authorized to log in from this station. ERROR_LOGIN_WKSTA_RESTRICTION 1241 The network address could not be used for the operation requested. ERROR_INCORRECT_ADDRESS 1242 The service is already registered. ERROR_ALREADY_REGISTERED 1243 The specified service does not exist. ERROR_SERVICE_NOT_FOUND 1244 The operation being requested was not performed because the user has not been authenticated. ERROR_NOT_AUTHENTICATED 1245 The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist. ERROR_NOT_LOGGED_ON 1246 Caller to continue with work in progress. ERROR_CONTINUE 1247 An attempt was made to perform an initialization operation when initialization has already been completed. ERROR_ALREADY_INITIALIZED 1248 No more local devices. ERROR_NO_MORE_DEVICES 1300 Not all privileges referenced are assigned to the caller. ERROR_NOT_ALL_ASSIGNED 1301 Some mapping between account names and security IDs was not done. ERROR_SOME_NOT_MAPPED 1302 No system quota limits are specifically set for this account. ERROR_NO_QUOTAS_FOR_ACCOUNT 1303 No encryption key is available. A well-known encryption key was returned. ERROR_LOCAL_USER_SESSION_KEY 1304 The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a null string. ERROR_NULL_LM_PASSWORD 1305 The revision level is unknown. ERROR_UNKNOWN_REVISION 1306 Indicates two revision levels are incompatible. ERROR_REVISION_MISMATCH 1307 This security identifier may not be assigned as the owner of this object. ERROR_INVALID_OWNER 1308 This security identifier may not be assigned as the primary group of an object. ERROR_INVALID_PRIMARY_GROUP 1309 An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client. ERROR_NO_IMPERSONATION_TOKEN 1310 The group cannot be disabled. ERROR_CANT_DISABLE_MANDATORY 1311 There are currently no logon servers available to service the logon request. ERROR_NO_LOGON_SERVERS 1312 A specified logon session does not exist. It may already have been terminated. ERROR_NO_SUCH_LOGON_SESSION 1313 A specified privilege does not exist. ERROR_NO_SUCH_PRIVILEGE 1314 A required privilege is not held by the client. ERROR_PRIVILEGE_NOT_HELD 1315 The name provided is not a properly formed account name. ERROR_INVALID_ACCOUNT_NAME 1316 The specified user already exists. ERROR_USER_EXISTS 1317 The specified user does not exist. ERROR_NO_SUCH_USER 1318 The specified group already exists. ERROR_GROUP_EXISTS 1319 The specified group does not exist. ERROR_NO_SUCH_GROUP 1320 Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member. ERROR_MEMBER_IN_GROUP 1321 The specified user account is not a member of the specified group account. ERROR_MEMBER_NOT_IN_GROUP 1322 The last remaining administration account cannot be disabled or deleted. ERROR_LAST_ADMIN 1323 Unable to update the password. The value provided as the current password is incorrect. ERROR_WRONG_PASSWORD 1324 Unable to update the password. The value provided for the new password contains values that are not allowed in passwords. ERROR_ILL_FORMED_PASSWORD 1325 Unable to update the password because a password update rule has been violated. ERROR_PASSWORD_RESTRICTION 1326 Logon failure—unknown user name or bad password. ERROR_LOGON_FAILURE 1327 Logon failure—user account restriction. ERROR_ACCOUNT_RESTRICTION 1328 Logon failure—account logon time restriction violation. ERROR_INVALID_LOGON_HOURS 1329 Logon failure—user not allowed to log on to this computer. ERROR_INVALID_WORKSTATION 1330 Logon failure—the specified account password has expired. ERROR_PASSWORD_EXPIRED 1331 Logon failure—account currently disabled. ERROR_ACCOUNT_DISABLED 1332 No mapping between account names and security IDs was done. ERROR_NONE_MAPPED 1333 Too many LUIDs were requested at one time. ERROR_TOO_MANY_LUIDS_REQUESTED 1334 No more LUIDs are available. ERROR_LUIDS_EXHAUSTED 1335 The subauthority part of a security identifier is invalid for this particular use. ERROR_INVALID_SUB_AUTHORITY 1336 The access control list (ACL) structure is invalid. ERROR_INVALID_ACL 1337 The security identifier structure is invalid. ERROR_INVALID_SID 1338 The security descriptor structure is invalid. ERROR_INVALID_SECURITY_DESCR 1340 The inherited access control list (ACL) or access control entry (ACE) could not be built. ERROR_BAD_INHERITANCE_ACL 1341 The server is currently disabled. ERROR_SERVER_DISABLED 1342 The server is currently enabled. ERROR_SERVER_NOT_DISABLED 1343 The value provided was an invalid value for an identifier authority. ERROR_INVALID_ID_AUTHORITY 1344 No more memory is available for security information updates. ERROR_ALLOTTED_SPACE_EXCEEDED 1345 The specified attributes are invalid, or incompatible with the attributes for the group as a whole. ERROR_INVALID_GROUP_ATTRIBUTES 1346 Either a required impersonation level was not provided, or the provided impersonation level is invalid. ERROR_BAD_IMPERSONATION_LEVEL 1347 Cannot open an anonymous level security token. ERROR_CANT_OPEN_ANONYMOUS 1348 The validation information class requested was invalid. ERROR_BAD_VALIDATION_CLASS 1349 The type of the token is inappropriate for its attempted use. ERROR_BAD_TOKEN_TYPE 1350 Unable to perform a security operation on an object that has no associated security. ERROR_NO_SECURITY_ON_OBJECT 1351 Indicates that a Windows NT Server could not be contacted or that objects within the domain are protected such that necessary information could not be retrieved. ERROR_CANT_ACCESS_DOMAIN_INFO 1352 The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation. ERROR_INVALID_SERVER_STATE 1353 The domain was in the wrong state to perform the security operation. ERROR_INVALID_DOMAIN_STATE 1354 This operation is only allowed for the Primary Domain Controller (PDC) of the domain. ERROR_INVALID_DOMAIN_ROLE 1355 The specified domain did not exist. ERROR_NO_SUCH_DOMAIN 1356 The specified domain already exists. ERROR_DOMAIN_EXISTS 1357 An attempt was made to exceed the limit on the number of domains per server. ERROR_DOMAIN_LIMIT_EXCEEDED 1358 Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk. ERROR_INTERNAL_DB_CORRUPTION 1359 The security account database contains an internal inconsistency. ERROR_INTERNAL_ERROR 1360 Generic access types were contained in an access mask that should already be mapped to nongeneric types. ERROR_GENERIC_NOT_MAPPED 1361 A security descriptor is not in the right format (absolute or self-relative). ERROR_BAD_DEscRIPTOR_FORMAT 1362 The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process. ERROR_NOT_LOGON_PROCESS 1363 Cannot start a new logon session with an identifier that is already in use. ERROR_LOGON_SESSION_EXISTS 1364 A specified authentication package is unknown. ERROR_NO_SUCH_PACKAGE 1365 The logon session is not in a state that is consistent with the requested operation. ERROR_BAD_LOGON_SESSION_STATE 1366 The logon session identifier is already in use. ERROR_LOGON_SESSION_COLLISION 1367 A logon request contained an invalid logon type value. ERROR_INVALID_LOGON_TYPE 1369 The transaction state of a registry subtree is incompatible with the requested operation. ERROR_RXACT_INVALID_STATE 1370 An internal security database corruption has been encountered. ERROR_RXACT_COMMIT_FAILURE 1371 Cannot perform this operation on built-in accounts. ERROR_SPECIAL_ACCOUNT 1372 Cannot perform this operation on this built-in special group. ERROR_SPECIAL_GROUP 1373 Cannot perform this operation on this built-in special user. ERROR_SPECIAL_USER 1374 The user cannot be removed from a group because the group is currently the user's primary group. ERROR_MEMBERS_PRIMARY_GROUP 1375 The token is already in use as a primary token. ERROR_TOKEN_ALREADY_IN_USE 1376 The specified local group does not exist. ERROR_NO_SUCH_ALIAS 1377 The specified account name is not a member of the local group. ERROR_MEMBER_NOT_IN_ALIAS 1378 The specified account name is already a member of the local group. ERROR_MEMBER_IN_ALIAS 1379 The specified local group already exists. ERROR_ALIAS_EXISTS 1380 Logon failure—the user has not been granted the requested logon type at this computer. ERROR_LOGON_NOT_GRANTED 1381 The maximum number of secrets that may be stored in a single system has been exceeded. ERROR_TOO_MANY_SECRETS 1382 The length of a secret exceeds the maximum length allowed. ERROR_SECRET_TOO_LONG 1383 The local security authority database contains an internal inconsistency. ERROR_INTERNAL_DB_ERROR 1384 During a logon attempt, the user's security context accumulated too many security IDs. ERROR_TOO_MANY_CONTEXT_IDS 1385 Logon failure—the user has not been granted the requested logon type at this computer. ERROR_LOGON_TYPE_NOT_GRANTED 1386 A cross-encrypted password is necessary to change a user password. ERROR_NT_CROSS_ENCRYPTION_REQUIRED 1387 A new member could not be added to a local group because the member does not exist. ERROR_NO_SUCH_MEMBER 1388 A new member could not be added to a local group because the member has the wrong account type. ERROR_INVALID_MEMBER 1389 Too many security IDs have been specified. ERROR_TOO_MANY_SIDS 1390 A cross-encrypted password is necessary to change this user password. ERROR_LM_CROSS_ENCRYPTION_REQUIRED 1391 Indicates an ACL contains no inheritable components. ERROR_NO_INHERITANCE 1392 The file or directory is corrupted and non-readable. ERROR_FILE_CORRUPT 1393 The disk structure is corrupted and non-readable. ERROR_DISK_CORRUPT 1394 There is no user session key for the specified logon session. ERROR_NO_USER_SESSION_KEY 1395 The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept. ERROR_LICENSE_QUOTA_EXCEEDED 1400 Invalid window handle. ERROR_INVALID_WINDOW_HANDLE 1401 Invalid menu handle. ERROR_INVALID_MENU_HANDLE 1402 Invalid cursor handle. ERROR_INVALID_CURSOR_HANDLE 1403 Invalid accelerator table handle. ERROR_INVALID_ACCEL_HANDLE 1404 Invalid hook handle. ERROR_INVALID_HOOK_HANDLE 1405 Invalid handle to a multiple-window position structure. ERROR_INVALID_DWP_HANDLE 1406 Cannot create a top-level child window. ERROR_TLW_WITH_WSCHILD 1407 Cannot find window class. ERROR_CANNOT_FIND_WND_CLASS 1408 Invalid window, it belongs to another thread. ERROR_WINDOW_OF_OTHER_THREAD 1409 Hot key is already registered. ERROR_HOTKEY_ALREADY_REGISTERED 1410 Class already exists. ERROR_CLASS_ALREADY_EXISTS 1411 Class does not exist. ERROR_CLASS_DOES_NOT_EXIST 1412 Class still has open windows. ERROR_CLASS_HAS_WINDOWS 1413 Invalid index. ERROR_INVALID_INDEX 1414 Invalid icon handle. ERROR_INVALID_ICON_HANDLE 1415 Using private DIALOG window words. ERROR_PRIVATE_DIALOG_INDEX 1416 The list box identifier was not found. ERROR_LISTBOX_ID_NOT_FOUND 1417 No wildcards were found. ERROR_NO_WILDCARD_CHARACTERS 1418 Thread does not have a clipboard open. ERROR_CLIPBOARD_NOT_OPEN 1419 Hot key is not registered. ERROR_HOTKEY_NOT_REGISTERED 1420 The window is not a valid dialog window. ERROR_WINDOW_NOT_DIALOG 1421 Control identifier not found. ERROR_CONTROL_ID_NOT_FOUND 1422 Invalid message for a combo box because it does not have an edit control. ERROR_INVALID_COMBOBOX_MESSAGE 1423 The window is not a combo box. ERROR_WINDOW_NOT_COMBOBOX 1424 Height must be less than 256. ERROR_INVALID_EDIT_HEIGHT 1425 Invalid device context (DC) handle. ERROR_DC_NOT_FOUND 1426 Invalid hook procedure type. ERROR_INVALID_HOOK_FILTER 1427 Invalid hook procedure. ERROR_INVALID_FILTER_PROC 1428 Cannot set nonlocal hook without a module handle. ERROR_HOOK_NEEDS_HMOD 1429 This hook procedure can only be set globally. ERROR_GLOBAL_ONLY_HOOK 1430 The journal hook procedure is already installed. ERROR_JOURNAL_HOOK_SET 1431 The hook procedure is not installed. ERROR_HOOK_NOT_INSTALLED 1432 Invalid message for single-selection list box. ERROR_INVALID_LB_MESSAGE 1434 This list box does not support tab stops. ERROR_LB_WITHOUT_TABSTOPS 1435 Cannot destroy object created by another thread. ERROR_DESTROY_OBJECT_OF_OTHER_THREAD 1436 Child windows cannot have menus. ERROR_CHILD_WINDOW_MENU 1437 The window does not have a system menu. ERROR_NO_SYSTEM_MENU 1438 Invalid message box style. ERROR_INVALID_MSGBOX_STYLE 1439 Invalid system-wide (SPI_*) parameter. ERROR_INVALID_SPI_VALUE 1440 Screen already locked. ERROR_SCREEN_ALREADY_LOCKED 1441 All handles to windows in a multiple-window position structure must have the same parent. ERROR_HWNDS_HAVE_DIFF_PARENT 1442 The window is not a child window. ERROR_NOT_CHILD_WINDOW 1443 Invalid GW_* command. ERROR_INVALID_GW_COMMAND 1444 Invalid thread identifier. ERROR_INVALID_THREAD_ID 1445 Cannot process a message from a window that is not a multiple-document interface (MDI) window. ERROR_NON_MDICHILD_WINDOW 1446 Pop-up menu already active. ERROR_POPUP_ALREADY_ACTIVE 1447 The window does not have scroll bars. ERROR_NO_SCROLLBARS 1448 Scroll bar range cannot be greater than 0x7FFF. ERROR_INVALID_SCROLLBAR_RANGE 1449 Cannot show or remove the window in the way specified. ERROR_INVALID_SHOWWIN_COMMAND 1450 Insufficient system resources exist to complete the requested service. ERROR_NO_SYSTEM_RESOURCES 1451 Insufficient system resources exist to complete the requested service. ERROR_NONPAGED_SYSTEM_RESOURCES 1452 Insufficient system resources exist to complete the requested service. ERROR_PAGED_SYSTEM_RESOURCES 1453 Insufficient quota to complete the requested service. ERROR_WORKING_SET_QUOTA 1454 Insufficient quota to complete the requested service. ERROR_PAGEFILE_QUOTA 1455 The paging file is too small for this operation to complete. ERROR_COMMITMENT_LIMIT 1456 A menu item was not found. ERROR_MENU_ITEM_NOT_FOUND 1457 Invalid keyboard layout handle. ERROR_INVALID_KEYBOARD_HANDLE 1458 Hook type not allowed. ERROR_HOOK_TYPE_NOT_ALLOWED 1459 This operation requires an interactive window station. ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION 1460 This operation returned because the time-out period expired. ERROR_TIMEOUT 1500 The event tracking file is corrupted. ERROR_EVENTLOG_FILE_CORRUPT 1501 No event tracking file could be opened, so the event tracking service did not start. ERROR_EVENTLOG_CANT_START 1502 The event tracking file is full. ERROR_LOG_FILE_FULL 1503 The event tracking file has changed between read operations. ERROR_EVENTLOG_FILE_CHANGED 1700 The string binding is invalid. RPC_S_INVALID_STRING_BINDING 1701 The binding handle is not the correct type. RPC_S_WRONG_KIND_OF_BINDING 1702 The binding handle is invalid. RPC_S_INVALID_BINDING 1703 The RPC protocol sequence is not supported. RPC_S_PROTSEQ_NOT_SUPPORTED 1704 The RPC protocol sequence is invalid. RPC_S_INVALID_RPC_PROTSEQ 1705 The string universal unique identifier (UUID) is invalid. RPC_S_INVALID_STRING_UUID 1706 The endpoint format is invalid. RPC_S_INVALID_ENDPOINT_FORMAT 1707 The network address is invalid. RPC_S_INVALID_NET_ADDR 1708 No endpoint was found. RPC_S_NO_ENDPOINT_FOUND 1709 The time-out value is invalid. RPC_S_INVALID_TIMEOUT 1710 The object universal unique identifier (UUID) was not found. RPC_S_OBJECT_NOT_FOUND 1711 The object universally unique identifier (UUID) has already been registered. RPC_S_ALREADY_REGISTERED 1712 The type UUID has already been registered. RPC_S_TYPE_ALREADY_REGISTERED 1713 The remote procedure call (RPC) server is already listening. RPC_S_ALREADY_LISTENING 1714 No protocol sequences have been registered. RPC_S_NO_PROTSEQS_REGISTERED 1715 The RPC server is not listening. RPC_S_NOT_LISTENING 1716 The manager type is unknown. RPC_S_UNKNOWN_MGR_TYPE 1717 The interface is unknown. RPC_S_UNKNOWN_IF 1718 There are no bindings. RPC_S_NO_BINDINGS 1719 There are no protocol sequences. RPC_S_NO_PROTSEQS 1720 The endpoint cannot be created. RPC_S_CANT_CREATE_ENDPOINT 1721 Not enough resources are available to complete this operation. RPC_S_OUT_OF_RESOURCES 1722 The RPC server is unavailable. RPC_S_SERVER_UNAVAILABLE 1723 The RPC server is too busy to complete this operation. RPC_S_SERVER_TOO_BUSY 1724 The network options are invalid. RPC_S_INVALID_NETWORK_OPTIONS 1725 There is not a remote procedure call active in this thread. RPC_S_NO_CALL_ACTIVE 1726 The remote procedure call failed. RPC_S_CALL_FAILED 1727 The remote procedure call failed and did not execute. RPC_S_CALL_FAILED_DNE 1728 A remote procedure call (RPC) protocol error occurred. RPC_S_PROTOCOL_ERROR 1730 The transfer syntax is not supported by the RPC server. RPC_S_UNSUPPORTED_TRANS_SYN 1732 The universal unique identifier (UUID) type is not supported. RPC_S_UNSUPPORTED_TYPE 1733 The tag is invalid. RPC_S_INVALID_TAG 1734 The array bounds are invalid. RPC_S_INVALID_BOUND 1735 The binding does not contain an entry name. RPC_S_NO_ENTRY_NAME 1736 The name syntax is invalid. RPC_S_INVALID_NAME_SYNTAX 1737 The name syntax is not supported. RPC_S_UNSUPPORTED_NAME_SYNTAX 1739 No network address is available to use to construct a universal unique identifier (UUID). RPC_S_UUID_NO_ADDRESS 1740 The endpoint is a duplicate. RPC_S_DUPLICATE_ENDPOINT 1741 The authentication type is unknown. RPC_S_UNKNOWN_AUTHN_TYPE 1742 The maximum number of calls is too small. RPC_S_MAX_CALLS_TOO_SMALL 1743 The string is too long. RPC_S_STRING_TOO_LONG 1744 The RPC protocol sequence was not found. RPC_S_PROTSEQ_NOT_FOUND 1745 The procedure number is out of range. RPC_S_PROCNUM_OUT_OF_RANGE 1746 The binding does not contain any authentication information. RPC_S_BINDING_HAS_NO_AUTH 1747 The authentication service is unknown. RPC_S_UNKNOWN_AUTHN_SERVICE 1748 The authentication level is unknown. RPC_S_UNKNOWN_AUTHN_LEVEL 1749 The security context is invalid. RPC_S_INVALID_AUTH_IDENTITY 1750 The authorization service is unknown. RPC_S_UNKNOWN_AUTHZ_SERVICE 1751 The entry is invalid. EPT_S_INVALID_ENTRY 1752 The server endpoint cannot perform the operation. EPT_S_CANT_PERFORM_OP 1753 There are no more endpoints available from the endpoint mapper. EPT_S_NOT_REGISTERED 1754 No interfaces have been exported. RPC_S_NOTHING_TO_EXPORT 1755 The entry name is incomplete. RPC_S_INCOMPLETE_NAME 1756 The version option is invalid. RPC_S_INVALID_VERS_OPTION 1757 There are no more members. RPC_S_NO_MORE_MEMBERS 1758 There is nothing to unexport. RPC_S_NOT_ALL_OBJS_UNEXPORTED 1759 The interface was not found. RPC_S_INTERFACE_NOT_FOUND 1760 The entry already exists. RPC_S_ENTRY_ALREADY_EXISTS 1761 The entry is not found. RPC_S_ENTRY_NOT_FOUND 1762 The name service is unavailable. RPC_S_NAME_SERVICE_UNAVAILABLE 1763 The network address family is invalid. RPC_S_INVALID_NAF_ID 1764 The requested operation is not supported. RPC_S_CANNOT_SUPPORT 1765 No security context is available to allow impersonation. RPC_S_NO_CONTEXT_AVAILABLE 1766 An internal error occurred in a remote procedure call (RPC). RPC_S_INTERNAL_ERROR 1767 The RPC server attempted an integer division by zero. RPC_S_ZERO_DIVIDE 1768 An addressing error occurred in the RPC server. RPC_S_ADDRESS_ERROR 1769 A floating-point operation at the RPC server caused a division by zero. RPC_S_FP_DIV_ZERO 1770 A floating-point underflow occurred at the RPC server. RPC_S_FP_UNDERFLOW 1771 A floating-point overflow occurred at the RPC server. RPC_S_FP_OVERFLOW 1772 The list of RPC servers available for the binding of auto handles has been exhausted. RPC_X_NO_MORE_ENTRIES 1773 Unable to open the character translation table file. RPC_X_SS_CHAR_TRANS_OPEN_FAIL 1774 The file containing the character translation table has fewer than 512 bytes. RPC_X_SS_CHAR_TRANS_SHORT_FILE 1775 A null context handle was passed from the client to the host during a remote procedure call. RPC_X_SS_IN_NULL_CONTEXT 1777 The context handle changed during a remote procedure call. RPC_X_SS_CONTEXT_DAMAGED 1778 The binding handles passed to a remote procedure call do not match. RPC_X_SS_HANDLES_MISMATCH 1779 The stub is unable to get the remote procedure call handle. RPC_X_SS_CANNOT_GET_CALL_HANDLE 1780 A null reference pointer was passed to the stub. RPC_X_NULL_REF_POINTER 1781 The enumeration value is out of range. RPC_X_ENUM_VALUE_OUT_OF_RANGE 1782 The byte count is too small. RPC_X_BYTE_COUNT_TOO_SMALL 1783 The stub received bad data. RPC_X_BAD_STUB_DATA 1784 The supplied user buffer is not valid for the requested operation. ERROR_INVALID_USER_BUFFER 1785 The disk media is not recognized. It may not be formatted. ERROR_UNRECOGNIZED_MEDIA 1786 The workstation does not have a trust secret. ERROR_NO_TRUST_LSA_SECRET 1787 The SAM database on the Windows NT Server does not have a computer account for this workstation trust relationship. ERROR_NO_TRUST_SAM_ACCOUNT 1788 The trust relationship between the primary domain and the trusted domain failed. ERROR_TRUSTED_DOMAIN_FAILURE 1789 The trust relationship between this workstation and the primary domain failed. ERROR_TRUSTED_RELATIONSHIP_FAILURE 1790 The network logon failed. ERROR_TRUST_FAILURE 1791 A remote procedure call is already in progress for this thread. RPC_S_CALL_IN_PROGRESS 1792 An attempt was made to logon, but the network logon service was not started. ERROR_NETLOGON_NOT_STARTED 1793 The user's account has expired. ERROR_ACCOUNT_EXPIRED 1794 The redirector is in use and cannot be unloaded. ERROR_REDIRECTOR_HAS_OPEN_HANDLES 1795 The specified printer driver is already installed. ERROR_PRINTER_DRIVER_ALREADY_INSTALLED 1796 The specified port is unknown. ERROR_UNKNOWN_PORT 1797 The printer driver is unknown. ERROR_UNKNOWN_PRINTER_DRIVER 1798 The print processor is unknown. ERROR_UNKNOWN_PRINTPROCESSOR 1799 The specified separator file is invalid. ERROR_INVALID_SEPARATOR_FILE 1800 The specified priority is invalid. ERROR_INVALID_PRIORITY 1801 The printer name is invalid. ERROR_INVALID_PRINTER_NAME 1802 The printer already exists. ERROR_PRINTER_ALREADY_EXISTS 1803 The printer command is invalid. ERROR_INVALID_PRINTER_COMMAND 1804 The specified data type is invalid. ERROR_INVALID_DATATYPE 1805 The environment specified is invalid. ERROR_INVALID_ENVIRONMENT 1806 There are no more bindings. RPC_S_NO_MORE_BINDINGS 1807 The account used is an interdomain trust account. Use your global user account or local user account to access this server. ERROR_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT 1808 The account used is a computer account. Use your global user account or local user account to access this server. ERROR_NOLOGON_WORKSTATION_TRUST_ACCOUNT 1809 The account used is a server trust account. Use your global user account or local user account to access this server. ERROR_NOLOGON_SERVER_TRUST_ACCOUNT 1810 The name or security identifier (SID) of the domain specified is inconsistent with the trust information for that domain. ERROR_DOMAIN_TRUST_INCONSISTENT 1811 The server is in use and cannot be unloaded. ERROR_SERVER_HAS_OPEN_HANDLES 1812 The specified image file did not contain a resource section. ERROR_RESOURCE_DATA_NOT_FOUND 1813 The specified resource type cannot be found in the image file. ERROR_RESOURCE_TYPE_NOT_FOUND 1814 The specified resource name cannot be found in the image file. ERROR_RESOURCE_NAME_NOT_FOUND 1815 The specified resource language identifier cannot be found in the image file. ERROR_RESOURCE_LANG_NOT_FOUND 1816 Not enough quota is available to process this command. ERROR_NOT_ENOUGH_QUOTA 1817 No interfaces have been registered. RPC_S_NO_INTERFACES 1818 The server was altered while processing this call. RPC_S_CALL_CANCELLED 1819 The binding handle does not contain all required information. RPC_S_BINDING_INCOMPLETE 1820 Communications failure. RPC_S_COMM_FAILURE 1821 The requested authentication level is not supported. RPC_S_UNSUPPORTED_AUTHN_LEVEL 1822 No principal name registered. RPC_S_NO_PRINC_NAME 1823 The error specified is not a valid Windows NT RPC error value. RPC_S_NOT_RPC_ERROR 1824 A UUID that is valid only on this computer has been allocated. RPC_S_UUID_LOCAL_ONLY 1825 A security package specific error occurred. RPC_S_SEC_PKG_ERROR 1826 Thread is not canceled. RPC_S_NOT_CANCELLED 1827 Invalid operation on the encoding/decoding handle. RPC_X_INVALID_ES_ACTION 1828 Incompatible version of the serializing package. RPC_X_WRONG_ES_VERSION 1829 Incompatible version of the RPC stub. RPC_X_WRONG_STUB_VERSION 1830 The idl pipe object is invalid or corrupted. RPC_X_INVALID_PIPE_OBJECT 1831 The operation is invalid for a given idl pipe object. RPC_X_INVALID_PIPE_OPERATION 1832 The Interface Definition Language (IDL) pipe version is not supported. RPC_X_WRONG_PIPE_VERSION 1898 The group member was not found. RPC_S_GROUP_MEMBER_NOT_FOUND 1899 The endpoint mapper database could not be created. EPT_S_CANT_CREATE 1900 The object UUID is the nil UUID. RPC_S_INVALID_OBJECT 1901 The specified time is invalid. ERROR_INVALID_TIME 1902 The specified form name is invalid. ERROR_INVALID_FORM_NAME 1903 The specified form size is invalid. ERROR_INVALID_FORM_SIZE 1904 The specified printer handle is already being waited on ERROR_ALREADY_WAITING 1905 The specified printer has been deleted. ERROR_PRINTER_DELETED 1906 The state of the printer is invalid. ERROR_INVALID_PRINTER_STATE 1907 The user must change his password before he logs on the first time. ERROR_PASSWORD_MUST_CHANGE 1908 Could not find the domain controller for this domain. ERROR_DOMAIN_CONTROLLER_NOT_FOUND 1909 The referenced account is currently locked out and may not be logged on to. ERROR_ACCOUNT_LOCKED_OUT 1910 The object exporter specified was not found. OR_INVALID_OXID 1911 The object specified was not found. OR_INVALID_OID 1912 The object resolver set specified was not found. OR_INVALID_SET 1913 Some data remains to be sent in the request buffer. RPC_S_SEND_INCOMPLETE 2000 The pixel format is invalid. ERROR_INVALID_PIXEL_FORMAT 2001 The specified driver is invalid. ERROR_BAD_DRIVER 2002 The window style or class attribute is invalid for this operation. ERROR_INVALID_WINDOW_STYLE 2003 The requested metafile operation is not supported. ERROR_METAFILE_NOT_SUPPORTED 2004 The requested transformation operation is not supported. ERROR_TRANSFORM_NOT_SUPPORTED 2005 The requested clipping operation is not supported. ERROR_CLIPPING_NOT_SUPPORTED 2202 The specified user name is invalid. ERROR_BAD_USERNAME 2250 This network connection does not exist. ERROR_NOT_CONNECTED 2401 This network connection has files open or requests pending. ERROR_OPEN_FILES 2402 Active connections still exist. ERROR_ACTIVE_CONNECTIONS 2404 The device is in use by an active process and cannot be disconnected. ERROR_DEVICE_IN_USE 3000 The specified print monitor is unknown. ERROR_UNKNOWN_PRINT_MONITOR 3001 The specified printer driver is currently in use. ERROR_PRINTER_DRIVER_IN_USE 3002 The spool file was not found. ERROR_SPOOL_FILE_NOT_FOUND 3003 A StartDocPrinter call was not issued. ERROR_SPL_NO_STARTDOC 3004 An AddJob call was not issued. ERROR_SPL_NO_ADDJOB 3005 The specified print processor has already been installed. ERROR_PRINT_PROCESSOR_ALREADY_INSTALLED 3006 The specified print monitor has already been installed. ERROR_PRINT_MONITOR_ALREADY_INSTALLED 3007 The specified print monitor does not have the required functions. ERROR_INVALID_PRINT_MONITOR 3008 The specified print monitor is currently in use. ERROR_PRINT_MONITOR_IN_USE 3009 The requested operation is not allowed when there are jobs queued to the printer. ERROR_PRINTER_HAS_JOBS_QUEUED 3010 The requested operation is successful. Changes will not be effective until the system is rebooted. ERROR_SUCCESS_REBOOT_REQUIRED 3011 The requested operation is successful. Changes will not be effective until the service is restarted. ERROR_SUCCESS_RESTART_REQUIRED 4000 WINS encountered an error while processing the command. ERROR_WINS_INTERNAL 4001 The local WINS cannot be deleted. ERROR_CAN_NOT_DEL_LOCAL_WINS 4002 The importation from the file failed. ERROR_STATIC_INIT 4003 The backup failed. Was a full backup done before? ERROR_INC_BACKUP 4004 The backup failed. Check the directory to which you are backing the database. ERROR_FULL_BACKUP 4005 The name does not exist in the WINS database. ERROR_REC_NON_EXISTENT 4006 Replication with a nonconfigured partner is not allowed. ERROR_RPL_NOT_ALLOWED 6118 The list of servers for this workgroup is not currently available. ERROR_NO_BROWSER_SERVERS_FOUND -------------------------------------------------------------------------------- Last updated on Tuesday, February 03, 2004 © 1992-2003 Microsoft Corporation. All rights reserved.

유광희 2004-10-30 (토) 01:14
  MSDN 2004. 4월달 버전일 경우
ms-help://MS.MSDNQTR.2004APR.1033/wcesdk40/html/cerefsystemerrors-numericalorder.htm
댓글주소